It is understood that at present in many industries we need to cut the material, and the use of equipment we call it cutting machine, different industries are not the same. Enterprises must pay attention to the following points when buying water cutting machine:

      1. Save energy. Choosing cutting opportunities that save energy brings many benefits to enterprises. One is to protect the environment and save energy; The second is to save the daily expenses of the enterprise.

      2. Cutting speed. Under the premise of meeting the cutting accuracy, we can talk about speed. We can use the software simulation function of the servo driver of the cutting machine to see whether the speed of the motor reaches the highest. In the test cutting speed without real cutting, increase the speed of addition and reduction.

      3. Automation. The operation of the cutting machine is required to be simple, easy to understand, not too complex, the average person will also go to do, otherwise it will cause the embarrassing situation that can not afford to buy the machine to keep the machine.

      4. Easy maintenance. For the signal and mechanical sensors do not have too much, unnecessary switches and indicators as little as possible, because once the mechanical failure of a device will affect the use of the cutting machine, parts less probability of failure is low, wiring is less, easy to find fault and replacement parts.

      5. Cutting accuracy. For the construction industry, the general requirements are below ±0.5mm; For automotive reflector class requirements in ±0.Olmm below; The cutting requirements in steel plate processing are as low as possible, but no one has done so far is ±0.5mm error. And now the machine manufacturers can provide the cutting accuracy is generally below ±0.2mm.