Aluminum profile cutter is a machine specializing in cutting aluminium profiles. Its cutters are circular saw blades with cemented carbide inserts. The main shaft speed of the saw blade is 2000-5000 revolutions. The aluminium profile cutter acts on cutting aluminium bars, aluminium plates, aluminium pipes and aluminium profiles for example.

Daily maintenance
1. Dirt on machine tools and guides must be cleaned every working day to keep the bed clean. Turn off the air supply and power supply at the end of work and exhaust the remaining air in the pipe strap of the machine tool at the same time.
2.Turn off the power supply if you have been away from the machine for a long time to prevent unprofessional operation.
3.Pay attention to observe whether there is any lubricant on the surface of the machine's horizontal and longitudinal guide rails and racks to keep them well lubricated!Weekly maintenance:
1. Clean the machine thoroughly every week. Clean the transverse and longitudinal guide rails, drive racks and racks and fill them with lubricant.
2.Check whether the rail scrapers in the longitudinal and horizontal directions work properly and replace them in time if not.
3.Check that all torches are loose to keep ignition normal.
4.If there is an automatic height adjustment device, check for sensitivity and replace the probe.
5. Check whether the plasma cutting nozzle and electrode are damaged or need to be replaced.